Search

Imada MX Series Test Stand

Category
Enquire Now

Product Description

Features
  • One stand for both compression (push) and tension (pull) tests
  • Stroke: 9.25″ (235mm)
  • Maximum clearance 9″ (with extender 14″)
  • Maximum load 110 lbf
  • Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control
  • Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Wide speed range: 0.4 – 12 in/min (optional speed ranges available)
  • Force Controlled operation with Imada Z Series force gauges
  • Optional timer and digital distance meter available
  • Conditional Overload Prevention
Speed Configurations
Standard Speed
 0.4~12″/min
Optional High Speed
 0.8~23.6″/min
Optional Low Speed
 0.15~4.7″/min

MX series test stands offer consistent testing and force control capability. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.

Connect the MX series test stand with an Imada Z Series force gauge to enable force controlled testing and Conditional Overload Prevention.

High/Low Set Point Force Control

Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.

One Way Force Control

Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.

Speed control, quick return and emergency stop are standard features. The MX series accepts any of the standard range Imada force gauges.  Optional timer and digital distance meter available.

 

Specifications for MX Series Motorized Test Stand

Model MX-500N MX-1000N MX-5000N
Capacity 500N (50kgf) 1000N (100kgf) 5000N (500kgf)
Stroke when a force gauge is mounted(*1) 235mm 410mm 305mm
Test speed 10 to 300mm/min 8 to 240mm/min 10 to 300mm/min
Gauges that can be combined (*2) Any force gauges except high capacity model force gauges Mechanical / Digital Force gauges
Compression sensors can NOT be combined.
Function Manual mode, Single mode, Continuous mode
Control Emergency button, Operation control by load value(*3), Overload prevention(*3)(*4)
Safety devices Stroke limit, emergency stop button
Power AC100V to 240V, free input
Size Please refer to dimensions.
Weight Approx. 13kg Approx. 24kg Approx. 30kg
Option Long stroke, Speed range change, Encoder
Accessory Grip mounting adapter(GF-1) Grip mounting adapter(GF-2)
Instruction manual, Power cable, Gauge mounting plate, Cover, Spare fuse, and Tools.

*1 Stroke is, in other words, max distance from the tip of a Z series force gauge to a test stand table.
*2 Please contact us if you would like to combine other force gauges or load cells with the test stand.
*3 Only valid with Z series digital force gauge and dedicated cable.
*4 We cannot ensure prevention against sensor break-down.

Scroll to Top